Happy Sunday! We have a guest today!
As you take a second to look through and read Kirsten’s guest post,
remember to breathe. The first time I saw these photos, I was absolutely
stunned. Oh, the power of our minds and our creativity – it far
surpasses my expectations. Make sure you also visit Kirsten at
Crafting Chicks,
her blog is equally amazing. Kirsten, I know you are going to inspire
more play kitchens. But I wouldn’t be surprised if you also inspire big
girl kitchens too – I want one!
——————————————————————————
I am so incredibly honored to be a guest here with Ana and all of you!! I
have loved seeing all the bragging boards and all the projects from the
readers. I was DYING when I first saw Ana’s site, and couldn’t wait to
start my first project. I had so much fun building this play kitchen. My
hubby was pretty impressed too. This was my first project and
definitely not my last. I would say that I am a crafter by nature, and
have ALWAYS wanted to build things with wood and nails and power tools.
Ana has made is SOOOOO possible for ANYBODY to build and I will be
forever indebted to her!
So
I have 4 kids 6 and under, and found the time to make this. I am
telling you that not because I am supermom, but because it’s really
doable. I had to work on it in really small snippets so this wasn’t a
weekend project, but worked on it over about a month and a half.
I think the biggest thing I learned was that building is NOT hard,
all you need is the right tools, and some dudes at Home Depot that are
willing to spend an hour or so with you at the saw, which I did. I
didn’t know ANYTHING about the different woods or power tools.
{ANA WANTS THE DETAILS}so here goes…
{MATERIALS}: I decided to use cabinet-grade hardwood plywood because
it was on sale for $23.00 (a promo) for a 4′x8′ piece-so much cheaper
than the pre cut pine boards, and I figured if I was going to the
trouble, might as well make it super sturdy. I’m pretty sure we will be
passing this down to the great great great grandkids. I’m also pretty
sure if someone broke into my house, it would really do some damage if I
chucked it at them.
When choosing your piece, make sure you don’t get one from the top of
the pile because they are usually a little warped. Go 5 or 6 down. I
ended up using a full 4′x8′ sheet of cabinet-grade hardwood plywood and
then a small piece of another sheet, and took home the leftovers. I also
used about a half a sheet of primed bead board ($19.00) for the back
pieces. So the total for the wood used was about $40.00.
{TOOLS}: I went out and bought a nail gun off of
Craigslist
for $60, it was daring but paid off, it’s a beauty. Since it was used, I
took it to the local building supply store and they put the ok on it.
They also informed me that it’s SUPER important to put 5-6 drops of oil
in your gun EACH time you use it. It was really surreal when I brought
it home, I felt a little more powerful than I normally do. For you
newbies, as I was just a couple months ago, I bought the 15 gauge, 2″
angled finish nails ($13.00-shown above) and used about 1/2 of them.
{TOOLS}
I also used a drill/screwdriver for the hardware and for the beginning
of the sink hole and the faucet hole, and then widened that hole with my
mom’s Bosch saber/jigsaw-super handy. By doing all my cuts at Home
Depot, I got away without using a scroll saw or any other power tool!
YEA! WARNING: Don’t try and drill a hole with the jigsaw, you might cut
your hand off, not that I tried or anything.
{ASSEMBLY} Putting it together was really a cinch especially with a
nail gun. I put each piece together in an hour or two. Although nailing
the bead board to the back was kind of a beast. It was chipping a little
bit, it worked, but I think screws might have been a better idea. If I
was to do it over again, I would have labeled each board as it was cut
at Home Depot, that would have saved me some time and remeasuring.
{SANDING & PAINT FINISH}: After the assembly, I sanded the whole
thing down with an orbital sander, super handy but not necessary. I
painted with a regular paint brush then sanded it down with an orbital
sander again. I then ended up retouching and painting another layer with
a wide sponge brush that gave it a nice smooth finish. I sanded that
coat down with the finest grit sand paper for a nice finished look, then
sprayed the whole thing with aerosol clear, satin protective finish.
{ACCESSORIES}:
If I’m being honest, I would have to say that the hardest part (and the
part that took the longest) for me was picking out the paint color, and
the right accessories because I can’t sleep at night until I get the
best deal and the cutest crud. So here’s the information:
PAINT COLOR ($6.00): I had them color match from the cover of this book
Handmade Home that
was on the shelf at Lowe’s..it was just enough blue with just enough
green. I chose one gallon of Valspare paint ($23.00) and used not even
1/4th of the can, and will use the rest on my laundry room.
HARWARE: The clear diamondy oven knobs did not come from Anthropology
but from Hobby Lobby for $2.50 each (50% off sale). In my searchings I
learned that they were by far the cheapest for that type of knob.
($10.00 total)
The silver handles on the oven, the towel rack, and the fridge are 8″
and 12″ pulls from Ikea. I think they were $5.99 and $7.99 for each
pair. ($14.00 total)
THE
FAUCET: I got this from ebay for $3.50…….plus SHIPPING, which ended up
at ($13.50). If you search for bar faucets, and the brand Price Pfister,
you will find some mini faucets that are perfect for play kitchens.
THE SINK: I got it at a second hand store for $1.00. It’s a stainless
steel and I think it is a dog bowl, but the lip on the edge was perfect
to hold it in there, you could also use a brownie pan or another size
pan. My little Q really likes to take it in and out so I didn’t fasten
it down so she could have her fun.
MIRRORS:
Also from Ikea was the mirrors, two on each side. This just might be
Q’s favorite part of the whole thing. They were also from Ikea and they
were $4.99 for a four pack. They have these cool, spongy adhesive
stickers, 4 for each mirror, that really seal it in place. Later I may
add some hooks under those mirrors on the fridge for her necklaces, I
think she would like that.
POTS AND PANS: IKEA, for the set of 4 it was ($10.00).
PLEXIGLASS
& FASTENERS: I bought this at Home Depot, and it was ($4.00) and it
was an 11×14″ piece. I’m not going to lie, the oven door was tough. In
fact, that was my least favorite part of the project. It was a balancing
act getting the oven door to lay flat and my nails kept shooting out
the side. I used a lot of wood putty on that, don’t look too closely.
Those fasteners were ($2.00) and are for mirrors. I decided not to
router the oven door and just put the plexiglass on the back, it worked
well. Also, I ended up not needing a closure for the oven door because
it rubs a little on one side and holds fine without one.
HINGES: I used 2 pairs of 2 1/2″ hinges on the fridge and a pair of 2″ hinges on the oven. Each pair was about ($2.00).
MAGNETS:
I added a magnet/metal piece set ($.79 at Home Depot) so the fridge
would close nicely. Each door has a metal piece and they both fasten to
the same magnet.
STOVE
BURNERS: On the flip side of those burners-three 5″soccer balls and a
basketball painted gray, all from Roberts crafts ($.79 each). It’s the
closest thing to burners I could find without cutting my own. They are
glued on with E6000 glue.
Here’s
the sink without the curtain and the tension rod. That front piece
hides the bowl of the sink and the faucet hardware nicely.
THE CURTAIN: This was a really fun part. The curtain is on a tension rod (that my hubby jimmy rigged to make smaller).
QUICK
CURTAIN MINI TUTORIAL: I got these fabrics from my favorite place to go
pick out material, Quilter’s Haven. All their fabrics are super up to
date and the nicest lady that worked there let me bounce ideas off her
and gave me great ruffle tips, seriously she was so nice.
In case you were wondering, and it’s not rocket science, but the
ruffles are sewn to a heavier duty fabric so it hangs straight, and is
then looped around the top. The dimensions of the fabric pieces (before
any sewing) are as follows (if only I could whip up a diagram like Ana,
that would really come in handy right about here):
- Main Cream-colored piece: 15.5″ wide 17.5″ long with 1/2″ seam
allowances. The circumference of the loop at the top is 4″ with 1/2″
seam allowance.
- The colorful fabric at the top was sewn on after the three ruffles, and about 1/2″ over the top of the pink ruffle.
- The dimensions of each ruffle before sewing: 10.5″x22″
- To sew each ruffle put fabric backside down and horizontal, and
bring the bottom up so the colorful sides are together and sew with 1/4″
seam allowance, turn inside out, then sew again along top, the ends are
still open and now you have a long tube.
- Fold the ends in and sew the ends closed.
- (now to prepare for gathering the fabric) Do two rows of basting
stitch (long stitch) 1/4″ from the top and about 1/4″ apart and leave
long tails of thread on each end.
- After you do this pull the thread lightly until the fabric gather evenly across the fabric
- Then pin the ruffle to the main piece, and sew a regular stitch between the two basting stitches.
- Pull the basting stitches out after it is properly sewn in place, leaving the main stitch, slick!
- The bottom of each ruffle hangs about 3/4″ over the ruffle beneath
it. The fabric over the loop (white, green, blue colored) is sewn over
the pink ruffle about 1/2″
- The blue pom pom row is sewn right where the top of the pink fabric and the colorful loop fabric join.
- The bottom ruffle hangs about and inch below the main piece of fabric.
- The edges and bottom of each ruffle hang free. Whew that was probably a little confusing, got it?
So for the grand total and it’s even on the more expensive end of
making it yourself, but it’s still impressive for a completely custom
job. And let’s be honest, these do-it yourself kitchens would beat the
Pottery Barn kitchens in a fight any day:
- Paint: $6
- Wood: $40
- Knobs: $10
- Handles: $14
- Faucet: $13.50
- Hinges: $6
- Material and pom poms: $12.00
- Tension Rod: $3
- Stove top burners: $3.20
- Nails: $4.50
- Sand Paper & Glue: $10
- Flower Scrubber: free
- Mirrors: $5
Grand Total Is: $127.20
And even more importantly, there’s a whole new wealth of knowledge nestled cozily in my head: Priceless!!
Thanks Ana for all of your hard work, you’ve really made a difference in the world.
Happy Crafting Ladies!
**Edited** You can find the dimensions for the fridge, sink, and stove on Ana’s site. http://thecraftingchicks.com/2010/04/giveaway-2-custom-photo-backdrop-ana-from-knock-off-wood-my-latest-project.html
http://www.mommywords.com/2009/10/diy-play-kitchen-who-needs-pottery-barn/